• Customer service:+33 563 71 32 94
My basket
-10%
6035,96€
5432.36€
Add to basket
click to expand
Oil manufacturing set with hydraulic press

Oil manufacturing set with hydraulic press

Add to basket
Add to basket
On request
From 5 units, only 28,00€ Add Save 30039,80€

Complete pack to extract olive oil, walnut oil… with a 60 cm hydraulic press
Full description
Reference : oliphm60
Complete package for extracting olive oil or walnut oil including:
- 1 hydraulic press with a 60 cm diameter
and no central screws - double piston effect- 40 full mats (no holes) each 40 cm in diameter,
- 1 type 32 Tre Spade grinder for grinding walnuts and olives with 1 additional blade and 2 additional plates (4.5 and 6 mm).
Everything you need to extract olive oil or walnut oil.
The hydraulic press measures 60 cm in diameter, with a steel box and steel radial reinforcements. The beech wood basket is 75 cm in height. The hydraulic mechanism with double piston effect presses with great strength and can raise the mechanism very quickly.
The type 32 TRE SPADE grinder with asynchronous 1100 watts motor offers 80 revs per minute, which gives very high torque and low speed for good grinding, even of olive stones, without heating the oil seeds. Reverse gear, body in tin-plated cast iron, worm screw in hot tin-plated wrought steel, base casing and tray in stainless steel, steel gears, plate (99 mm in diameter with 8 mm holes) and knife in reinforced steel.

USE
Begin by grinding the whole olives with their stones, or the shelled walnuts in the grinder.
Remove the basket from the press (wooden cage) and place a mat in the tray (basin).
Spread around 2 cm of paste, then place a second mat. Repeat the operation and end with a mat.
Start the piston mechanism to press the oleaginous seed paste into the mats.
The oil with the amurca will flow out of the press.
Once you have recovered this liquid, allow it to decant in order to recover the oil that will float to the top naturally.

MAINTENANCE
To clean the press, simply wash it with a hose and dry it before covering it for storage. Take care of the mechanism which should simply be washed with a sponge if necessary.
The grinder is very easy to maintain because the body can be quickly disassembled. Clean it with soapy water, dry it and grease it after each use. You can use the mats repeatedly by simply rinsing them in water. If the paste is very deep in the fibres, you can use a soft brush to clean them. Do not use a brush that is too abrasive as this will tear the fibres of the mat.

The entire set costs € 4,990 instead of € 5,112.20.
Ask a question
Guarantee: 24 months
Net weight 264,8 kg

Customer feedback for Oil manufacturing set with hydraulic press

I give my opinion

To deliver your opinion on this product please choose a mark between 1 and 5 by clicking on stars

* Fields marked by an asterisk are required.
Veuillez cocher le Captcha pour valider
If you have any question or if you have a problem, use the form provided.
Back
Pack/item-dimensions