My basket
357.50

Stainless steel manual apple grinder with flywheel

357.50
357.50
In stock 48/72 hour dispatch

Manual apple grinder, stainless steel hopper and blades, aluminium rollers, steel flywheel and shaft.

Reference : bropigia
Manual apple grinder, also suitable for any fruit with pips (pears, quinces, papayas…)and pitted fruit with stones (peaches, apricots, mangos…) in order to press them for juice or cider. The hopper and the blades are made of AISI 304 stainless steel, the rollers are aluminium, the shafts and flywheel are in steel and the gears are made of Teflon. 75x50 cm hopper.

USE
Fill the hopper with apples or other fruit. When you turn the flywheel, the fruit is broken into pieces by the blades until the pieces fit between the rollers and the fruit is reduced to a thick paste. We advise placing the grinder over a tub or on trestles and to place a basin underneath to recover the ground apples before filling the press to make your juice.

MAINTENANCE
Simply rinse the hopper and the grinding mechanism (blades and rollers), to avoid small pieces remaining stuck inside your apple grinder. The teflon gears do not require any special maintenance or greasing, meaning that you can clean the apple grinder with water.

TIP
In order to ensure that your apple grinder enjoys a long life, clean your fruit by steeping them in water, so that you only have clean fruit, separated from small stones or gravel that may have been picked up that will go on to damage and wear out the blades prematurely.
For very hard fruit such as quinces, do not load the hopper with full buckets, but little by little as the grinding progresses. This will allow you to efficiently grind these very hard fruit without wearing out your apple grinder too soon.
It is possible to use this fruit grinder to grind pitted fruit such as peaches, apricots or mangos, but it is imperative that you remove the stones first. You can then grind any kind of pitted fruit in order to put them through the press and make juice.
Ask a question
Guarantee: 24 months
Main material aluminium
Other material stainless steel hopper
Colour green
Length 116 cm
Width 70 cm
Height 52 cm
Other dimensions Hopper measuring 50 x 75 cm
Net weight 18 kg

Customer feedback for Stainless steel manual apple grinder with flywheel

I give my opinion

To deliver your opinion on this product please choose a mark between 1 and 5 by clicking on stars

* Fields marked by an asterisk are required.
Veuillez cocher le Captcha pour valider
If you have any question or if you have a problem, use the form provided.
detail-product-01